Numerical study on the three-dimensional temperature distribution according to laser conditions in photothermal therapy of peri-implantitis.

PURPOSE: Dental implants have been successfully implemented as a treatment for tooth loss. However, peri-implantitis, an inflammatory reaction owing to microbial deposition around the implant, can lead to implant failure. So, it is necessary to treat peri-implantitis. Therefore, this numerical study is aimed at investigating conditions for treating peri-implantitis. METHODS: Photothermal therapy, a laser treatment method, utilizes photothermal effect, in which light is converted to heat. This technique has advantage of selectively curing inflamed tissues by increasing their temperature. Accordingly, herein, photothermal effect on peri-implantitis is studied through numerical analysis with using Arrhenius damage integral and Arrhenius thermal damage ratio. RESULTS: Through numerical analysis on peri-implantitis treatment, we explored temperature changes under varied laser settings (laser power, radius, irradiation time). We obtained the temperature distribution on interface of artificial tooth root and inflammation and determined whether temperature exceeds or does not exceed 47℃ to know which laser power affects alveolar bone indirectly. We defined the Arrhenius thermal damage ratio as a variable and determined that the maximum laser power that does not exceed 47℃ at the AA' line is 1.0 W. Additionally, we found that the value of the Arrhenius thermal damage ratio is 0.26 for a laser irradiation time of 100 s and 0.50 for 500 s. CONCLUSION: The result of this numerical study indicates that the Arrhenius thermal damage ratio can be used as a standard for determining the treatment conditions to help assisted laser treatment for peri-implantitis in each numerical analysis scenario.

Modeling the risk of aquatic species invasion spread through boater movements and river connections.

Aquatic invasive species (AIS) are one of the greatest threats to the functioning of aquatic ecosystems worldwide. Once an invasive species has been introduced to a new region, many governments develop management strategies to reduce further spread. Nevertheless, managing AIS in a new region is challenging because of the vast areas that need protection and limited resources. Spatial heterogeneity in invasion risk is driven by environmental suitability and propagule pressure, which can be used to prioritize locations for surveillance and intervention activities. To better understand invasion risk across aquatic landscapes, we developed a simulation model to estimate the likelihood of a waterbody becoming invaded with an AIS. The model included waterbodies connected via a multilayer network that included boater movements and hydrological connections. In a case study of Minnesota, we used zebra mussels (Dreissena polymorpha) and starry stonewort (Nitellopsis obtusa) as model species. We simulated the impacts of management scenarios developed by stakeholders and created a decision-support tool available through an online application provided as part of the AIS Explorer dashboard. Our baseline model revealed that 89% of new zebra mussel invasions and 84% of new starry stonewort invasions occurred through boater movements, establishing it as a primary pathway of spread and offering insights beyond risk estimates generated by traditional environmental suitability models alone. Our results highlight the critical role of interventions applied to boater movements to reduce AIS dispersal.

Modelo del riesgo de la invasión de especies acuáticas dispersadas por movimiento de botes y conexiones entre ríos Resumen Las especies acuáticas invasoras (EAI) son una de las principales amenazas para el funcionamiento de los ecosistemas acuáticos a nivel mundial. Una vez que una especie invasora ha sido introducida a una nueva región, muchos gobiernos desarrollan estrategias de manejo para disminuir la dispersión. Sin embargo, el manejo de las especies acuáticas invasoras en una nueva región se complica debido a las amplias áreas que necesitan protección y los recursos limitados. La heterogeneidad espacial de un riesgo de invasión es causada por la idoneidad ambiental y la presión de propágulo, que puede usarse para priorizar la ubicación de las actividades de vigilancia e intervención. Desarrollamos una simulación para estimar la probabilidad de que un cuerpo de agua sea invadido por EAI para tener un mejor entendimiento del riesgo de invasión en los paisajes acuáticos. El modelo incluyó cuencas conectadas a través de una red multicapa que incluía movimiento de botes y conexiones hidrológicas. Usamos como especies modelo a Dreissena polymorpha y a Nitellopsis obtusa en un estudio de caso en Minnesota. Simulamos el impacto de los escenarios de manejo desarrollado por los actores y creamos una herramienta de decisiones por medio de una aplicación en línea proporcionada como parte del tablero del Explorer de EAI. Nuestro modelo de línea base reveló que el 89% de las invasiones nuevas de D. polymorpha y el 84% de las de N. obtusa ocurrieron debido al movimiento de los botes, lo que lo estableció como una vía primaria de dispersión y nos proporcionó información más allá de las estimaciones de riesgo generadas por los modelos tradicionales de idoneidad ambiental. Nuestros resultados resaltan el papel crítico de las intervenciones aplicadas al movimiento de los botes para reducir la dispersión de especies acuáticas invasoras.

Exploring the body surface temperature of the lumbosacral region and relevant back-shu points in patients with lumbar disc herniation induced low back pain based on infrared thermography. / åŸºäºŽçº¢å¤–çƒ­æˆåƒæŠ€æœ¯æŽ¢è®¨è °æ¤Žé—´ç›˜çªå‡ºç—‡è °ç—›æ‚£è€ è °éª¶éƒ¨åŠç›¸å ³èƒŒä¿žç©´è¡¨çš®æ¸©åº¦.

OBJECTIVES: To observe the body surface temperature of the lumbosacral region and relevant back-shu points in patients with lumbar disc herniation (LDH) induced low back pain utilizing infrared thermography, and to explore the functional attribute changes of acupoints under pathological conditions. METHODS: A total of 50 patients with LDH induced low back pain were included as the observation group, and 45 healthy subjects were included as the control group. Using infrared thermography, the body surface temperature of the lumbosacral region and bilateral Sanjiaoshu (BL 22), Shenshu (BL 23), Qihaishu (BL 24), Dachangshu (BL 25), Guanyuanshu (BL 26), Xiaochangshu (BL 27), and Pangguangshu (BL 28) was measured in both groups. The temperature difference values between the bilateral lumbosacral regions and back-shu points of the two groups were calculated. Additionally, the body surface temperature of the affected and healthy sides of the lumbosacral region and relevant back-shu points was compared in the observation group. RESULTS: Compared with the control group, the body surface temperature of the lumbosacral region and the bilateral temperature difference values of the lumbosacral regions were increased in the observation group (P<0.001). The body surface temperature difference values of bilateral Shenshu (BL 23), Qihaishu (BL 24), Dachangshu (BL 25), Guanyuanshu (BL 26) and Xiaochangshu (BL 27) in the observation group were higher than those in the control group (P<0.05, P<0.01, P<0.001). In the observation group, the body surface temperature of the affected side of the lumbosacral region as well as Shenshu (BL 23) and Dachangshu (BL 25) was elevated compared with that of healthy side (P<0.001). CONCLUSIONS: The patients with LDH induced low back pain have imbalanced and asymmetrical distribution of body surface temperature in the lumbosacral region and related back-shu points, Shenshu (BL 23) and Dachangshu (BL 25) have the relative specificity.

Compression stress-strain curve of lithium slag recycled fine aggregate concrete.

As one of the key materials used in the civil engineering industry, concrete has a global annual consumption of approximately 10 billion tons. Cement and fine aggregate are the main raw materials of concrete, and their production causes certain harm to the environment. As one of the countries with the largest production of industrial solid waste, China needs to handle solid waste properly. Researchers have proposed to use them as raw materials for concrete. In this paper, the effects of different lithium slag (LS) contents (0%, 10%, 20%, 40%) and different substitution rates of recycled fine aggregates (RFA) (0%, 10%, 20%, 30%) on the axial compressive strength and stress-strain curve of concrete are discussed. The results show that the axial compressive strength, elastic modulus, and peak strain of concrete can increase first and then decrease when LS is added, and the optimal is reached when the LS content is 20%. With the increase of the substitution rate of RFA, the axial compressive strength and elastic modulus of concrete decrease, but the peak strain increases. The appropriate amount of LS can make up for the mechanical defects caused by the addition of RFA to concrete. Based on the test data, the stress-strain curve relationship of lithium slag recycled fine aggregate concrete is proposed, which has a high degree of agreement compared with the test results, which can provide a reference for practical engineering applications. In this study, LS and RFA are innovatively applied to concrete, which provides a new way for the harmless utilization of solid waste and is of great significance for the control of environmental pollution and resource reuse.

High ambient temperature impact on the pattern of emergency-room visits due to renal colic in the Middle East.

Urolithiasis has a seasonal pattern, with an established increase in incidence during the summer months. This study aims to assess the impact of high ambient temperatures on emergency room (ER) visits related to renal colic (RC) in a Middle Eastern country over the past decade. Population data were extracted using the MDClone Big Data platform. We recorded demographic and clinical data on all RC-associated ER visits from January 2012 to April 2023 and calculated the heat index (HI) that combines daily average coastal plane temperatures and humidity percentages. There was a total of 12,770 ER visits (median age 48 years, 9,236 (72%) males). The number of visits increased during the hottest months (July-October), with the highest numbers recorded during August. The number of visits remained stable throughout the study. We identified a linear association between humidity and the incidence of ER visits (p = 0.002), and a non-linear association between ambient temperature (p < 0.0001) and HI (p < 0.0001). There was a direct relationship between high temperatures and ER visits on the same day (risk ratio [RR]: 1.75, p = 0.036), with a 2-day lag (RR: 1.123, p = 0.024). In Conclusion, there is a significant relationship between temperature, humidity, HI, and the number of ER visits due to RC. Adjusted resource allocation and healthcare workforce availability are essential for managing additional cases during heat waves. Clinical implications: Increased demand is expected during heatwaves and within a 2-day lag, emphasizing the importance of proactive strategies to effectively manage RC patients.

Interplay of management and environmental drivers shifts size structure of reef fish communities.

Countries are expanding marine protected area (MPA) networks to mitigate fisheries declines and support marine biodiversity. However, MPA impact evaluations typically assess total fish biomass. Here, we examine how fish biomass disaggregated by adult and juvenile life stages responds to environmental drivers, including sea surface temperature (SST) anomalies and human footprint, and multiple management types at 139 reef sites in the Mesoamerican Reef (MAR) region. We found that total fish biomass generally appears stable across the region from 2006 to 2018, with limited rebuilding of fish stocks in MPAs. However, the metric of total fish biomass masked changes in fish community structure, with lower adult than juvenile fish biomass at northern sites, and adult:juvenile ratios closer to 1:1 at southern sites. These shifts were associated with different responses of juvenile and adult fish to environmental drivers and management. Juvenile fish biomass increased at sites with high larval connectivity and coral cover, whereas adult fish biomass decreased at sites with greater human footprint and SST anomalies. Adult fish biomass decreased primarily in Honduran general use zones, which suggests insufficient protection for adult fish in the southern MAR. There was a north-south gradient in management and environmental drivers, with lower coverage of fully protected areas and higher SST anomalies and coastal development in the south that together may undermine the maintenance of adult fish biomass in the southern MAR. Accounting for the interplay between environmental drivers and management in the design of MPAs is critical for increasing fish biomass across life history stages.

Los países están ampliando las redes de áreas marinas protegidas (AMP) para mitigar la disminución de las pesquerías y apoyar la biodiversidad marina. Sin embargo, las evaluaciones de impacto de las AMP típicamente estudian la biomasa total de peces. Aquí, examinamos cómo la biomasa de peces desagregada por etapas de vida adultas y juveniles responde a factores ambientales como anomalías de la temperatura superficial del mar (SST) e impacto humano, y múltiples tipos de manejo en 139 sitios de arrecifes en el sistema arrecifal mesoamericano (SAM). Encontramos que la biomasa total de peces en general parece estable en toda la región entre 2006 y 2018, con una recuperación limitada de las poblaciones de peces en las AMP. Sin embargo, la métrica de biomasa total de peces enmascaró los cambios en la estructura de la comunidad de peces, con una biomasa de peces adultos más baja que juveniles en los sitios del norte, y proporciones adulto:juvenil más cercana a 1:1 en los sitios del sur. Estos cambios fueron asociados con diferentes respuestas de peces juveniles y adultos a variables ambientales y de manejo. La biomasa de peces juveniles aumentó en sitios con alta conectividad larvaria y cobertura coralina, mientras que la biomasa de peces adultos disminuyó en sitios con mayor impacto humano y anomalías en la SST. La biomasa de peces adultos disminuyó principalmente en las zonas de uso general (GUZ) hondureñas, lo cual sugiere una protección insuficiente para peces adultos en el sur del SAM. Hubo un gradiente norte­sur en el manejo y los factores ambientales, con menor cobertura de áreas totalmente protegidas y mayores anomalías de SST y desarrollo costero en el sur. En conjunto esto puede degradar el mantenimiento de la biomasa de peces adultos en el sur del SAM. La interacción entre factores ambientales y el manejo en el diseño de las AMP es fundamental para aumentar la biomasa de peces en todas las etapas del ciclo de vida.

Changes in temperature in preheated crystalloids at ambient temperatures relevant to a prehospital setting: an experimental simulation study with the application of prehospital treatment of trauma patients suffering from accidental hypothermia.

BACKGROUND: Accidental hypothermia is common in all trauma patients and contributes to the lethal diamond, increasing both morbidity and mortality. In hypotensive shock, fluid resuscitation is recommended using fluids with a temperature of 37-42°, as fluid temperature can decrease the patient's body temperature. In Sweden, virtually all prehospital services use preheated fluids. The aim of the present study was to investigate how the temperature of preheated infusion fluids is affected by the ambient temperatures and flow rates relevant for prehospital emergency care. METHODS: In this experimental simulation study, temperature changes in crystalloids preheated to 39 °C were evaluated. The fluid temperature changes were measured both in the infusion bag and at the patient end of the infusion system. Measurements were conducted in conditions relevant to prehospital emergency care, with ambient temperatures varying between - 4 and 28 °C and flow rates of 1000 ml/h and 6000 ml/h, through an uninsulated infusion set at a length of 175 cm. RESULTS: The flow rate and ambient temperature affected the temperature in the infusion fluid both in the infusion bag and at the patient end of the system. A lower ambient temperature and lower flow rate were both associated with a greater temperature loss in the infusion fluid. CONCLUSION: This study shows that both a high infusion rate and a high ambient temperature are needed if an infusion fluid preheated to 39 °C is to remain above 37 °C when it reaches the patient using a 175-cm-long uninsulated infusion set. It is apparent that the lower the ambient temperature, the higher the flow rate needs to be to limit temperature loss of the fluid.

Theoretical evaluation of the impact of diverse treatment conditions by calculation of the tumor control probability (TCP) of simulated cervical cancer Hyperthermia-Radiotherapy (HT-RT) treatments in-silico.

INTRODUCTION: Hyperthermia (HT) induces various cellular biological processes, such as repair impairment and direct HT cell killing. In this context, in-silico biophysical models that translate deviations in the treatment conditions into clinical outcome variations may be used to study the extent of such processes and their influence on combined hyperthermia plus radiotherapy (HT + RT) treatments under varying conditions. METHODS: An extended linear-quadratic model calibrated for SiHa and HeLa cell lines (cervical cancer) was used to theoretically study the impact of varying HT treatment conditions on radiosensitization and direct HT cell killing effect. Simulated patients were generated to compute the Tumor Control Probability (TCP) under different HT conditions (number of HT sessions, temperature and time interval), which were randomly selected within margins based on reported patient data. RESULTS: Under the studied conditions, model-based simulations suggested a treatment improvement with a total CEM43 thermal dose of approximately 10 min. Additionally, for a given thermal dose, TCP increased with the number of HT sessions. Furthermore, in the simulations, we showed that the TCP dependence on the temperature/time interval is more correlated with the mean value than with the minimum/maximum value and that comparing the treatment outcome with the mean temperature can be an excellent strategy for studying the time interval effect. CONCLUSION: The use of thermoradiobiological models allows us to theoretically study the impact of varying thermal conditions on HT + RT treatment outcomes. This approach can be used to optimize HT treatments, design clinical trials, and interpret patient data.

Abuse of right during application of coercive medical measures in criminal proceedings.

OBJECTIVE: Aim: To determine the problematic issues of ensuring the rights and freedoms of persons suffering from mental disorders and to whom CMM are applied in criminal proceedings under the legislation of Ukraine and the legislation of the states that adhere to the modern concepts of international standards of human rights ensuring to a person the CMM are applied to. PATIENTS AND METHODS: Materials and Methods: Legal positions of the ECHR, criminal procedural legislation of a number of states, and a survey of scientists and practitioners conducted by the authors are used in this paper (total number of respondents was 168). A set of general scientific and special methods are used to achieve the aim of the study. CONCLUSION: Conclusions: The practice of applying СMM to persons suffering from mental disorders in criminal proceedings in Ukraine and other states does not fully meet international standards and needs improvement. It was suggested to make changes to the legal acts on the use of CMM in criminal proceedings.

Recovery of plastic packaging from mixed municipal solid waste. A case study from Austria.

Austria must recycle more packaging materials. Especially for plastic packaging waste, significant increases are necessary to reach the EU recycling targets for 2025 and 2030. In addition to improving separate collection and introducing a deposit system for specific fractions, the share of plastic packaging in mixed municipal solid waste (MSW) could be utilized. In Austria, about 1.8milliontonnes of mixed MSW are generated. This includes about 110,000 t/a of plastic packaging waste. Most of the mixed MSW (94 %) is sent directly or via residues from pre-treatment, such as mechanical-biological treatment or waste sorting, to waste incineration. While materials such as glass and metals can also be recovered from the bottom ash, combustible materials such as plastics must be recovered before incineration. This work aims to evaluate the recovery potential of plastic packaging waste in mixed MSW with automated waste sorting. For this purpose, two of the largest Austrian waste sorting plants, with a total annual throughput of about 280,000 t/a, were investigated. The investigation included regular sampling of selected output streams and sorting analysis. The results show that the theoretical recovery potential of plastic packaging from these two plants is 6,500 t/a on average. An extrapolation to Austria results in a potential of about 83,000 t/a. If losses due to further treatment, such as sorting and recycling, are considered, about 30,000 t/a of recyclate could be returned to plastic production. This would correspond to an increase in plastic packaging recycling rate from 25 % to 35 %.

Overview of municipal solid waste management in sub-tropical climatic region of North Eastern India.

Municipal solid waste management (MSWM) is perceived as a global issue regardless of the place of waste generation. The amount of unmanaged waste is increasing rapidly, along with its impact on the environment and human health. In hilly areas, specifically the North Eastern Region (NER) states of India, due to the unique topography coupled with socio-economic factors, there are inadequate waste management practices marked by insufficient infrastructure, minimal research studies, and limited data availability. This paper comprehensively reviews the existing status of MSWM practices and waste treatment technologies, identifies the challenges, and discusses the prospective approaches for MSWM in NER states of India. NER, is characterized by its hilly terrain and has the most diverse demographic profile in the country. The study highlights the notable increase in waste generation in the urban population in NER. The total amount of waste generated in NER is about 2907 tons per day, with a collection rate of 86.96%, treatment at 31.09%, and landfilling at 33.67%. The biodegradable fraction makes up the majority of waste composition (more than 50%) in NER, followed by recyclables and inert. The existing MSWM consists of waste collection, transportation, and disposal with limited source segregation and treatment. All the states of NER practice open dumping and burning as the primary waste treatment and disposal system. The study discusses the challenges and prospects to ensure effective MSWM in NER. This review is a region-specific study that considers cultural diversity, topography, and socio-economic dynamics. The outcome of this review will be helpful to the researchers and policymakers in making appropriate waste management plans and improve the MSWM system in NER.

Global perspective of municipal solid waste and landfill leachate: generation, composition, eco-toxicity, and sustainable management strategies.

Globally, more than 2 billion tonnes of municipal solid waste (MSW) are generated each year, with that amount anticipated to reach around 3.5 billion tonnes by 2050. On a worldwide scale, food and green waste contribute the major proportion of MSW, which accounts for 44% of global waste, followed by recycling waste (38%), which includes plastic, glass, cardboard, and paper, and 18% of other materials. Population growth, urbanization, and industrial expansion are the principal drivers of the ever-increasing production of MSW across the world. Among the different practices employed for the management of waste, landfill disposal has been the most popular and easiest method across the world. Waste management practices differ significantly depending on the income level. In high-income nations, only 2% of waste is dumped, whereas in low-income nations, approximately 93% of waste is burned or dumped. However, the unscientific disposal of waste in landfills causes the generation of gases, heat, and leachate and results in a variety of ecotoxicological problems, including global warming, water pollution, fire hazards, and health effects that are hazardous to both the environment and public health. Therefore, sustainable management of MSW and landfill leachate is critical, necessitating the use of more advanced techniques to lessen waste production and maximize recycling to assure environmental sustainability. The present review provides an updated overview of the global perspective of municipal waste generation, composition, landfill heat and leachate formation, and ecotoxicological effects, and also discusses integrated-waste management approaches for the sustainable management of municipal waste and landfill leachate.

Caste, mistrust and municipal inaction: The interwoven barriers for the integration of waste pickers in India.

Solid waste management in low- and middle-income countries like India faces significant challenges due to the increasing waste generation that surpasses the current capacity. Therefore, the informal waste sector (IWS) is more vital than ever in handling consumer waste alongside municipal solid waste management (SWM) systems. However, the integration of the IWS into formal waste management systems remains unresolved due to adverse social and economic conditions. This study focuses on identifying the root causes that hinder the integration of the IWS in India's waste management system, using the city of Chennai as a case study. Adopting an institutional perspective, we analyse the institutional landscape of the waste management system, considering both formal rules (in policy documents) and informal rules (i.e., social norms and routines). The institutional network analysis reveals a significant misalignment in perceptions among governance levels concerning the integration of the IWS. The study shows a considerable gap between rules-in-form and rules-in-use, leading to 1) Preclusion of waste pickers in collecting door-to-door source-segregated waste (i.e., recyclables). 2) Unfair pricing in transactions with small aggregators. 3) Lack of ID cards for waste pickers. These barriers are ultimately rooted in caste discrimination, misalignment between governance levels, and the exclusion of waste pickers in the policymaking process. In conclusion, understanding and rectifying the institutional gaps and discriminatory practices are essential steps towards effectively integrating the IWS in India's waste management system, promoting a more inclusive and sustainable approach to waste management.

Long-Term Tissue Preservation at Ambient Temperature for Post-Mass Fatality Incident DNA-Based Victim Identification.

In a mass fatality incident (MFI), effective preservation of tissue samples is the cornerstone for downstream DNA-based identification of victims. This is commonly achieved through freezing of tissue samples excised from bodies/fragmented remains which may be buried or stored in refrigerated containers. This may, however, not be possible depending on the nature of the MFI; in particular, during armed conflict/war where extended periods of electrical outages would be expected. The present study compared the effectiveness of long-term tissue preservation at ambient temperatures using two commercial products (non-iodized kitchen salt and a 40% alcoholic beverage) against a chemical preservative (Allprotect™ Tissue Reagent (Qiagen, Germantown, MD, USA)) and freezing at -20 °C. Bovine muscle tissue, used as a proxy for human tissue, was treated with the four preservation methods and sampled at six different time-points over a 24-month period. All four methods were able to preserve the bovine tissue, generally yielding STR-PCR (Short Tandem Repeat-Polymerase Chain Reaction) amplicons > 200 bp in size even at the end of 24 months. Gel electrophoresis, however, indicated that salt was more effective in preserving DNA integrity with high-molecular-weight DNA clearly visible as compared to the low-molecular-weight DNA smears observed in the other methods. This study also proposes a simple process for the rapid and low-cost preservation of tissue samples for long-term storage at ambient temperatures in support of post-incident victim identification efforts.

Fully Characterized Effective Bacteriophages Specific against Antibiotic-Resistant Enterococcus faecalis, the Causative Agent of Dental Abscess.

Background and Objectives: Enterococcus faecalis (E. faecalis) is a primary pathogen responsible for dental abscesses, which cause inflammation and pain when trapped between the crown and soft tissues of an erupted tooth. Therefore, this study aims to use specific phages as an alternative method instead of classical treatments based on antibiotics to destroy multidrug-resistant E. faecalis bacteria for treating dental issues. Materials and Methods: In the current study, twenty-five bacterial isolates were obtained from infected dental specimens; only five had the ability to grow on bile esculin agar, and among these five, only two were described to be extensive multidrug-resistant isolates. Results: Two bacterial isolates, Enterococcus faecalis A.R.A.01 [ON797462.1] and Enterococcus faecalis A.R.A.02, were identified biochemically and through 16S rDNA, which were used as hosts for isolating specific phages. Two isolated phages were characterized through TEM imaging, which indicated that E. faecalis_phage-01 had a long and flexible tail, belonging to the family Siphoviridae, while E. faecalis_phage-02 had a contractile tail, belonging to the family Myoviridae. Genetically, two phages were identified through the PCR amplification and sequencing of the RNA ligase of Enterococcus phage vB_EfaS_HEf13, through which our phages shared 97.2% similarity with Enterococcus phage vB-EfaS-HEf13 based on BLAST analysis. Furthermore, through in silico analysis and annotations of the two phages' genomes, it was determined that a total of 69 open reading frames (ORFs) were found to be involved in various functions related to integration excision, replication recombination, repair, stability, and defense. In phage optimization, the two isolated phages exhibited a high specific host range with Enterococcus faecalis among six different bacterial hosts, where E. faecalis_phage-01 had a latent period of 30 min with 115.76 PFU/mL, while E. faecalis_phage-02 had a latent period of 25 min with 80.6 PFU/mL. They were also characterized with stability at wide ranges of pH (4-11) and temperature (10-60 °C), with a low cytotoxic effect on the oral epithelial cell line at different concentrations (1000-31.25 PFU/mL). Conclusions: The findings highlight the promise of phage therapy in dental medicine, offering a novel approach to combating antibiotic resistance and enhancing patient outcomes. Further research and clinical trials will be essential to fully understand the therapeutic potential and safety profile of these bacteriophages in human populations.

Eco-efficiency as a prioritization tool in the reduction of food waste in restaurants.

Striving towards eco-efficiency means creating more value while generating a product or service with a reduced environmental impact. This quest makes it possible to link objectives associated with both the environmental and the economic pillars of sustainable development. Eco-efficiency could therefore be an interesting tool to evaluate the impacts of food waste (FW) and the potential of various food waste reduction strategies (FWRSs). However, the use of eco-efficiency to assess the interest in implementing FWRSs has never been explored in the foodservice sector. This work firstly aims to carry out an in-depth analysis of the costs of the FW generation of an independent restaurant. Secondly, based on these costs data and on some previously documented environmental impact data with a life cycle assessment according to ISO 14045:2012, this work also aims to model and evaluate the performance of FWRSs from a perspective of improving a restaurant eco-efficiency. The impact of each FWRS on the eco-efficiency of the restaurant under study was measured by modeling their economic and environmental net benefits over three implementation periods (one week, one month and six months) and under scenarios of strong and weak adherence. The study identified the most eco-efficient FWRSs to be implemented to reduce FW in the studied restaurant. In addition, key factors affecting eco-efficiency were raised, namely the period following the implementation of FWRSs, the FW reduction rate between FWRSs affecting the same type of FW, the specificity of the FWRSs and their ability to limit the waste of vegetables, meat, sea products and food requiring significant processing time by the cooks. Thus, these elements will guide foodservice managers in adopting FWRSs aimed at reducing FW generated in their restaurant and at improving its eco-efficiency. In addition, this work proposes a new methodology intended for the scientific community to identify FWRSs that have a strong impact on a restaurant eco-efficiency.

Water conservation pattern of Fangcheng River Basin in Beibu Gulf and its response to precipitation.

Assessing the spatiotemporal patterns of watershed water conservation under the influence of the South Asian monsoon climate and its response to precipitation is essential for revealing the evolving patterns of water conservation under different temporal scales. Following the principles of water balance and using the Soil and Water Assessment Tool (SWAT) model, we investigated the spatiotemporal patterns of water conservation and its response to precipitation in the Fangcheng River Basin of Beibu Gulf. The results showed that water conservation in Fangcheng River Basin calculated by SWAT model were 1637.4 mm·a-1, accounting for 50.7% of the mean annual precipitation. The variation of water conservation in different sub-basins was obviously different. Sub-basins with high forest coverage and steep slopes exhibited higher water conservation, while sub-basins with other land use types (such as cropland and grassland), gentle slopes, and intense human activities showed lower water conservation. At the monthly scale, both water conservation and its variation showed similar response characteristics to precipitation in the basin. The response of water conservation variation to sub-precipitation events could be classified into two types. For the short-term rainfall events (duration≤2 days), water conservation variation showed a linear relationship. For the medium to long-term rainfall events (2 days

Rainfall-runoff partitioning in small watersheds of different vegetation types in the loess area based on hydrogen and oxygen isotope tracing.

Recognizing watershed runoff process and its component sources is a prerequisite for the rational use of water resources. To elucidate the effects and quantitative contributions of various vegetation types on the components of watershed runoff, we centered on the Caijiachuan main channel watershed in Jixian, Shanxi and five sub-watersheds with distinct vegetation types. By tracking the hydrological responses to two representative rainfall events and assessing the spatiotemporal variations in hydrogen and oxygen isotope signatures, we aimed to discern disparities in the runoff processes across these sub-watersheds and pinpoint their constituent origins. The results showed that under medium rainfall condition, the contribution rates of event water to the river flow of each watershed were in an order of protected forest (94.3%) > Caijiachuan main channel (83.1%) > agro-pastoral composite (64.3%) > plantation-secondary forest (52.4%) > cropland (0.3%) > secondary forest (0.0%); under light rainfall condition, plantation-secondary forest (52.4%) > protected forest (58.5%) > cropland (40.6%) > secondary forest (15.8%) > agro-pastoral composite (12.5%) > Caijiachuan main channel (9.3%). The event water contribution rate of secondary forest and protected forest watersheds to runoff was higher than that of plantation watersheds. The secondary forests watersheds had a stronger runoff storage capacity. The event water contribution rate of protected forest and agro-pastoral composite watersheds under medium rainfall intensity condition was greater than that under light rainfall intensity condition, while the event water contribution rate of cropland, plantation-secondary forest, and secondary forest watersheds was in adverse. The event water contribution to the runoff of forested watersheds was greater than that of cropland watersheds, which may be related to the presence of silt dams at the mouth of agricultural watershed channels. This study can provide a scientific basis for the analysis of water conservation and runoff change attribution in the loess area of west Shanxi.

Spillover effects of organic agriculture on pesticide use on nearby fields.

The environmental impacts of organic agriculture are only partially understood and whether such practices have spillover effects on pests or pest control activity in nearby fields remains unknown. Using about 14,000 field observations per year from 2013 to 2019 in Kern County, California, we postulate that organic crop producers benefit from surrounding organic fields decreasing overall pesticide use and, specifically, pesticides targeting insect pests. Conventional fields, by contrast, tend to increase pesticide use as the area of surrounding organic production increases. Our simulation suggests that spatially clustering organic cropland can entirely mitigate spillover effects that lead to an increase in net pesticide use.